官能团化SEBS对PP/SEBS共混体系性能的影响

doi:10.3969/j.issn.2095-2198.2023.06.005

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

PDF (2712KB)
输出: BibTeX | EndNote (RIS)

摘要

以苯乙烯(St)为共聚单体，以甲基丙烯酸缩水甘油酯(GMA)和马来酸酐(MAH)为接枝单体，将其与聚苯乙烯-乙烯-丁二烯苯乙烯(SEBS)共混，采用自由基熔融接枝技术制备SEBS-g-(GMA-co-St)、SEBS-g-(MAH-co-St)和SEBS-g-(GMA/MAH-co-St)接枝共聚物.将所制备的的接枝共聚物作为相容剂与聚丙烯(PP)和SEBS熔融共混，研究了接枝共聚物中接枝单体种类对PP/SEBS共混物的热学性能、光学性能、力学性能和微观结构的影响.结果表明：在PP/SEBS共混体系中引入SEBS接枝共聚物后，共混物的综合性能均有不同程度的增加；GMA被用作接枝单体制备的SEBS-g-(GMA-co-St)使PP/SEBS共混物的性能增幅最为显著，极大地改善了PP和SEBS的相容性，进而显著提高了共混物的冲击韧性；PP/SEBS/SEBS-g-（GMA-co-St）共混物的冲击强度和断裂伸长率均达到最大值，分别为30 165.82 J/m²和1 482.40%，呈现出典型的韧性断裂特征，断面呈现出褶皱状韧性断裂、多层断裂的现象，且共混物的拉伸强度基本保持不变.此外，接枝共聚物的引入提高了共混物的热稳定性，并很好地保持了共混物的高透过率，使共混物整体表现出优异的光学性能.

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章

关键词: 聚丙烯')" href="#">

聚丙烯聚苯乙烯-乙烯-丁二烯苯乙烯力学性能韧性断裂

Abstract:

Styrene(St)was utilized as a co-monomer，while glycidyl methacrylate(GMA)or maleic anhydride(MAH)was employed as graft monomers.These graft monomers were then blended with polystyrene-ethylene-butylene-styrene(SEBS)and prepared into SEBS-g-(GMA-co-St)，SEBS-g-(MAH-co-St)，and SEBS-g-(GMA/MAH-co-St)graft copolymers using the melt free radical grafting technique.Subsequently，these graft copolymers were utilized as compatibilizers for melt blending with polypropylene(PP)and SEBS，and their effects on the thermal，optical，mechanical properties，and microstructure of the PP/SEBS blends were investigated.The results showed that after introducing SEBS graft copolymers into PP/SEBS blends，the comprehensive properties of the blends increased to varying degrees，and the performance increase was most significant when GMA was used as the graft monomer.SEBS-g-(GMA-co-St)graft copolymer with GMA as the graft monomer greatly improved the compatibility between PP and SEBS，and significantly enhanced the impact toughness of the blends.The impact strength and elongation at break of the blends reached a maximum value，which were 30 165.82 J/m²and 1 482.40%，respectively，exhibiting typical ductile fracture characteristics with folded toughening and multi-layer fracture on the fracture surface，while the tensile strength of the blends remained almost unchanged.In addition，the introduction of the graft copolymer improved the thermal stability of the blends and maintained their high transmittance，showing excellent optical properties.

Key words: polypropylene')" href="#">

polypropylene polystyrene-ethylene-butadiene-styrene mechanical properties ductile fracture

出版日期: 2024-12-31 发布日期: 2024-09-14 整期出版日期: 2024-12-31

ZTFLH:

TB332

基金资助:

辽宁省教育厅青年科技人才"育苗"项目（LQ2020007）

通讯作者: 宋立新

作者简介: 杨冰

引用本文:

杨冰, 王伟, 迟卫瀚, 丛飞, 李永超, 王元霞, 宋立新.

官能团化SEBS对PP/SEBS共混体系性能的影响 [J]. 沈阳化工大学学报, 2023, 37(6): 506-517.

链接本文:

https://xuebao.syuct.edu.cn/CN/10.3969/j.issn.2095-2198.2023.06.005 或 https://xuebao.syuct.edu.cn/CN/Y2023/V37/I6/506

［1］汪子健,孟寒,罗鹏飞,等.PP/POE-g-GMA/CaCO₃晶须复合材料的制备与性能［J］.弹性体,2019,29(6):17-21.

［2］李琳,陈孟杨,刘贺千,等.PP-g-MAH/SEBS复合材料力学与交流介电性能研究［J］.哈尔滨理工大学学报,2022,27(5):130-135.

［3］JAZANI O M,AREFAZAR A,JAFARI S H,et al.A Study on the Effects of SEBS-g-MAH on the Phase Morphology and Mechanical Properties of Polypropylene/Polycarbonate/SEBS Ternary Polymer Blends［J］.Journal of Applied Polymer Science,2011,121(5):2680-2687.

［4］HARLAY A,BROSSIER T,MORAND N,et al.Modification of Poly(Styrene-b-(Ethylene-co-Butylene)-b-Styrene) via Free-Radical Grafting and Its Photo-Crosslinking［J］.Polymer Engineering & Science,2021,61(12):3082-3093.

［5］戴亚杰,刘安琪,张文龙,等.SEBS-g-MAH的制备及SEBS/PP阻燃材料的性能影响［J］.塑料,2017,46(2):58-61.

［6］王小兰,张师军,张薇.GMA接枝SEBS及其对PA6的改性及增容［J］.合成树脂及塑料,2003(4):51-55.

［7］GONG K Q,TIAN H C,LIU H,et al.Grafting of Isobutylene-Isoprene Rubber with Glycidyl Methacrylate and Its Reactive Compatibilization Effect on Isobutylene-Isoprene Rubber/Polyamides 12 Blends［J］.Industrial & Engineering Chemistry Research,2021,60(45):16258-16266.

［8］孟祥宇,宋立新,史颖,等.PLA-g-GMA的制备及其对PLA/PPC共混体系性能的影响［J］.塑料工业,2020,48(3):54-58.

［9］SUN H X,ZHANG J.Modified Epoxy Resin with SEBS-g-MAH to Fabricate Crack-Free and Robust Hydrophobic Coatings on the Surface of PP/SEBS Matrix［J］.Surfaces and Interfaces,2022,28:101662.

［10］SONG L X,ZHANG Q,HAO Y S,et al.Effect of Different Comonomers Added to Graft Copolymers on the Properties of PLA/PPC/PLA-g-GMA Blends［J］.Polymers,2022,14(19):4088.

［11］ACIKBAS Y,APAN R,ERDOGAN M,et al.Optical Characterization and Swelling Behaviour of Langmuir-Blodgett Thin Films of a Novel Poly ［(Styrene(ST)-co-Glycidyl Methacrylate(GMA)］［J］.Sensors and Actuators B:Chemical,2017,241:1111-1120.

［12］WEI Q,CHIONNA D,GALOPPINI E,et al.Functionalization of LDPE by Melt Grafting with Glycidyl Methacrylate and Reactive Blending with Polyamide-6［J］.Macromolecular Chemistry and Physics,2003,204(8):1123-1133.

［13］WANG L S,WANG X L,YAN G L.Synthesis,Characterisation and Flame Retardance Behaviour of Poly(Ethylene Terephthalate)Copolymer Containing Triaryl Phosphine Oxide［J］.Polymer Degradation and Stability,2000,69(1):127-130.

［14］肖超,冷鑫钰,王慧,等.纳米粒子在PC/SEBS-g-MA复合材料中的选择性分布及对热性能的影响［J］.高分子材料科学与工程,2017,33(9):90-93,100.

［15］PAN Y,WU G F,MA H F,et al.Improved Compatibility of PET/HDPE Blend by Using GMA Grafted Thermoplastic Elastomer［J］.Polymer-Plastics Technology and Materials,2020,59(17):1887-1898.

［16］JAGTAP R N,WADGAONKR K K,MEHTA L B.Influence of Ethylene-Methacrylic Acid Copolymer on Thermo-Mechanical,Morphological and Rheological Properties of Recycled PET/SEBS Blend［J］.Fibers and Polymers,2019,20(7):1323-1332.

［17］WANG Y S,WEI Z Y,LENG X F,et al.Highly Toughened Polylactide with Epoxidized Polybutadiene by in-SituReactive Compatibilization［J］.Polymer,2016,92:74-83.

［18］赵媛媛,葛铁军,刘晓洋.偶联剂和润滑剂对稻壳粉/聚乙烯复合材料性能的影响［J］.沈阳化工大学学报,2021,35(4):340-346.

[1]	张跃宏, 张爽, 丁茯, 赵坤, 徐曼, 孙长亮. 镧铈稀土对Al-Si-Mg铸造铝合金性能影响研究 [J]. 沈阳化工大学学报, 2024, 38(1): 36-44.
[2]	朱晓宇1, 梁雨苏2, 李文泽1. 碳纳米管增强铜铬基复合材料的制备及其性能研究 [J]. 沈阳化工大学学报, 2023, 37(3): 193-199.
[3]	马亚辉, 王建, 牛永安. 金刚烷型双马来酰亚胺树脂共聚体系的固化成型与性能研究 [J]. 沈阳化工大学学报, 2023, 37(1): 37-43.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed