罐体,模态分析,Workbench,湿模态,液体晃动," /> 罐体,模态分析,Workbench,湿模态,液体晃动,"/> tank,modal analysis,Workbench,wet modal,liquid shake,"/> <p class="MsoNormal"> <span>基于</span><span>Workbench</span><span>的油罐车罐体的模态分析</span>
Please wait a minute...
沈阳化工大学学报, 2023, 37(1): 56-59    doi: 10.3969/j.issn.2095-2198.2023.01.009
  机械工程 本期目录 | 过刊浏览 | 高级检索 |

基于Workbench的油罐车罐体的模态分析

(1. 沈阳化工大学 化学工程学院,辽宁 沈阳 110142;

(2. (沈阳化工大学 机械与动力工程学院, 辽宁 沈阳 110142

Modal Analysis of Tank of Oil Trucker Based on Workbench

下载:  PDF (1461KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 研究了油罐车罐体在不同充液率下的固有特性及液体晃动对罐体固有特性的影响.使用Workbench中的模态模块和声学模态模块分别对空载、充液70%、充液85%和满载状态的油罐车罐体进行模态分析.其中:空载状态罐体直接采用模态模块对其进行模态分析;充液状态采用声固耦合法建立湿模态模型,使用Workbench中的声学模态模块对其进行模态分析.将得到的几种不同状态的6阶固有频率与振型进行对比,可知罐体的固有频率会随着充液量的增多而降低,液体晃动对罐体系统有很大的影响.
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
关键词:  罐体')" href="#">

罐体  模态分析  Workbench  湿模态  液体晃动    

Abstract: 

The natural characteristics of oil truckers under different filling rates are studied,and the influence of liquid sloshing on the inherent characteristics of oil truckers are focused on.The modal module and acoustic modal module in Workbench are used to carry out modal analysis on the tank body of oil tanker in the state of no-load,70%,85% and 100% filling respectively.Among them,the modal module is directly used to analyze the no-load tank;The acoustic solid coupling method is used to establish the wet modal model in the liquid filled state,and the acoustic modal module in workbench is used to carry out modal analysis.Finally,the six order natural frequencies and vibration modes of the different states are obtained.Comparing the obtained 6th order natural frequencies and vibration modes of several different states,it is known that the natural frequency of the tank will decrease with the increase of the liquid filling amount,and the liquid sloshing has a great impact on the tank system.

Key words:  tank')" href="#">

tank    modal analysis    Workbench    wet modal    liquid shake

               出版日期:  2023-02-27      发布日期:  2024-06-06      整期出版日期:  2023-02-27
ZTFLH: 

H113.1

 
作者简介:  邓康茜(1997—),男,重庆人,硕士研究生在读,主要从事油罐车罐体裂纹扩展方面的研究.
引用本文:    
邓康茜, 党鹏飞.

基于Workbench的油罐车罐体的模态分析 [J]. 沈阳化工大学学报, 2023, 37(1): 56-59.
DENG Kangxi, DANG Pengfei.

Modal Analysis of Tank of Oil Trucker Based on Workbench . Journal of Shenyang University of Chemical Technology, 2023, 37(1): 56-59.

链接本文:  
https://xuebao.syuct.edu.cn/CN/10.3969/j.issn.2095-2198.2023.01.009  或          https://xuebao.syuct.edu.cn/CN/Y2023/V37/I1/56

1]赵勇.轻油罐车罐体的动力学分析[D.郑州:郑州大学,200631-40.

2]周利剑,黄兢,臧丽英,等.LNG储罐外墙模态分析[J.科学技术与工程,201212(2)447-449454.

3]薛杰,何尚龙,杜大华,等.充液容器流固耦合模态仿真分析研究[J.火箭推进,201541(1)90-97.

4]陈炜彬,段浩,王云.基于声固耦合算法的发射模拟试验承压结构湿模态分析[J.水下无人系统学报,201725(5)365-370.

5]李丽君,李红艳,刚宪约,等.声固耦合系统数值计算方法的研究与应用[J.工程设计学报,201017(6)449-453.

6]金志浩,王雷,徐晓光,等.可拆卸储罐罐体的有限元分析[J.沈阳化工大学学报,201933(2)155-158182.

No related articles found!
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed